The punching process refers to punching various graphics on steel, leather, cloth, wood, and other materials to meet different needs.

Compared with sheet punching, pipe punching has many similarities in terms of deformation properties and deformation characteristics, but because the pipe is a hollow cylindrical blank, the wall of the pipe is in contact with the convex and concave dies during punching is an isolated surface. It is not flat like a plate, so special technological measures and its mold structure need to be taken. The traditional method of punching is to use a punching die to process through holes on the flat plate. The pipe punching process can be divided into a steel die punching and rubber die punching.

What are the Methods of Punching?

1. Steel die punching process:
It is to use the convex and concave dies made of tool steel to punch the pipe. According to the relationship between the movement direction of the punch and the movement direction of the press slide when the die is working, the steel dies punching can be divided into vertical punching and horizontal punching. The so-called vertical punching means that the movement direction of the punch is consistent with the movement direction of the press slider. It is to place the punch on the upper die and move up and down with the slider of the press, while the female die is mounted on the cantilever support of the lower die. Since the die of this type of die is cantilevered, it can be called a cantilever punching die. The so-called horizontal punching means that the movement direction of the punch is perpendicular to the movement direction of the press slider. It fixes the punch and the punch on the lower die and uses the wedge fixed on the upper die to push the slider with the punch on the lower die. Make horizontal movement to achieve the purpose of punching the pipe wall. Because this type of die uses a wedge mechanism to drive the punch to move horizontally, it can be called a wedge punching die.

2. Rubber dies punching process:
It is to use the easy deformation and polymerizable of rubber to disperse and place it inside the pipe as an elastic punch instead of the steel punch, to carry out punching processing on the pipe wall. The rubber used as elastic punch includes natural rubber and polyurethane rubber. Since the unit pressure that the former can withstand is not high (generally less than 40Mpa), it is only used for small batch production of soft materials and thin-walled pipes. Polyurethane rubber is an elastomer between natural rubber and plastic. It not only has high strength, but also has a large allowable unit pressure (generally up to 500Mpa), and has a high hardness range, wear resistance, oil resistance, aging resistance, and tear resistance. So long life and can be used for larger batches. Punching on the tube can be divided into two methods: core and coreless. In the cored punching method. The punching process is completed by the cooperation of the upper and lower dies. Different from normal punching, the lower die needs to extend into the tube, and the lower die and the lower die holder cannot be made into a whole.

Read more: The Principle and Difference Between Punching and Blanking Die Processing Technology