Clausing Drill Press

December 27, 2017

Clausing Drill Press Specs
Capacity, hand feed	1.25″ (31.75mm) dia
Production rated, with optional power feed, 1 1/2 hp motor	1″ (25.4mm) in cast iron 3/4″ (19mm) in mild steel
Drill to center of circle	20″ (508mm) dia
Spindle nose	No. 3MT, 1.74″ (44.2mm) OD
Spindle travel	6.5″ (165mm)
Column	ground steel, 4″ (102mm) dia, 3/8″ (9.5mm) thick wall
Quill (ground steel)	2.5″ (63.5mm) dia
Quill return spring, capacity	40 lbs (18kg)
Table, Drill Press Style A
Working Surface	22″ x 19.5″ (559 x 495mm)
Table slots	two, 15.5″ (394mm) long, for .5″ (12.7mm) T-bolt
Table travel, one setting	20″ (508mm) dia
Spindle to table, maximum	33.125″ (841mm)
Base, Drill Press Style A
Working surface, ground	15.5″ x 13″ (394 x 330mm)
Base T-slots	two, 13″ (330mm) long, for .5″ T-bolt
Spindle to Base, maximum	43.375″ (1102mm)
Drill Press Style B
Column bracket to center of spindle	9.25″ (235mm)
Column to center of spindle	10″ (254mm)
Spindle to table, max. distance	25.437″ (646mm)
Column length	43″ (1092mm)
Min. center to center distance	20″ (508mm) dia
Motor … NEMA Frame Sizes	182 and 184
Shipping weights, approximate, with motors
Drill press Style A	630 lbs (286kg)
Drill press Style B	390lbs (177kg)

Capabilities